Rye Brook incorporated on July 7, 1982, after 58 percent of residents voted in favor, making it the first new village in New York State in 54 years. Its history runs much deeper: Mosier's Fight, a Revolutionary War skirmish, took place here on December 2, 1781. About 10,000 people live in the village today, which keeps roughly 100 acres of parks and includes Ward's Castle, an early reinforced-concrete house on the National Register.
The village sits inland at about 249 feet, along the Connecticut line, with Blind Brook running through it. It is close enough to Long Island Sound to catch nor'easters and tropical-storm winds. One practical wrinkle: Rye Brook shares the 10573 ZIP code with Port Chester, so the right building department depends on which village your house is in, not on your mailing address.
A 1982 village built mostly in the 1950s and '60s
County planning figures from the 2013–2017 American Community Survey count about 3,800 occupied housing units in Rye Brook. About 1,050 were built in the 1950s and about 640 in the 1960s, with roughly 600 from before 1940 and a wave of about 520 added in the 2000s. The median year built is 1963.
With an asphalt roof lasting a few decades, a 1960s house has typically been reroofed at least once, and sometimes the second layer went right over the first. Houses of this era also tend to have attics that were vented with a pair of gable louvers and little else.
What to plan for on a Rye Brook roof
How many layers are up there
We count layers at the eaves and rakes before quoting. If there are already two, New York's code rules out a third, so the roof comes off to the deck. Even with one layer, a tear-off on a 60-year-old house lets Jersey Roofing's crew see the sheathing, replace soft sections, and install ice-barrier membrane at the eaves as the code requires, which an overlay never does well.
Ventilation in postwar attics
Many 1950s and '60s houses were built with gable vents and no soffit intake. That leaves attics hot in summer and frosty in winter, which shortens shingle life and feeds ice dams. During a replacement, Jersey Roofing's crew can open continuous soffit intake where the eaves allow it and add a ridge vent, so air moves from low to high the way GAF and Owens Corning ventilation guidance expects.
Storm winds near the Sound
Nor'easters and tropical storms reach Rye Brook with plenty of force. Jersey Roofing's crew installs with the manufacturer's high-wind nailing pattern and starter strips at the eaves and rakes. Owens Corning Duration with matching starter and hip and ridge shingles qualifies for a 160 mph enhanced wind warranty, which is a sensible upgrade for exposed roofs on higher ground.
Roof permits in Rye Brook
- Office
- Village of Rye Brook Building & Code Enforcement
- Phone
- (914) 939-0668
- Website
- ryebrookny.gov/departments/building-code-enforce
The office is at 938 King Street and posts permit applications online; we confirm your house is in Rye Brook rather than Port Chester, and Jersey Roofing files for you.
The roof systems installed in Rye Brook
Jersey Roofing installs complete GAF and Owens Corning systems: ice and water barrier at the eaves and valleys, synthetic underlayment, starter strips, architectural or designer shingles, matched ridge cap and balanced ventilation. On a qualifying GAF system it can register the Golden Pledge® warranty, and on an Owens Corning system, Platinum Protection. Both include lifetime workmanship coverage. Compare the warranties.
Neighborhoods we serve in and around Rye Brook
- King Street corridor
- Westchester Avenue corridor